Brew Hut rebuild/Tools list: Difference between revisions
Jump to navigation
Jump to search
imported>Roland No edit summary |
imported>Artem |
||
| Line 13: | Line 13: | ||
* hacksaw (adjustable, currently 12") with two blades | * hacksaw (adjustable, currently 12") with two blades | ||
* bow saw with 2 spare 21" blades | * bow saw with 2 spare 21" blades | ||
* | * hatchet | ||
* | * pliers | ||
* adjustable bit screw driver - needs various size robertson bits | |||
* carpenter's Hammer -- 1 | |||
* tape measure -- 1 | * tape measure -- 1 | ||
* | * wire brush | ||
* small caulking gun - no caulk | |||
* small caulking gun | |||
* paint roller cage 8" | * paint roller cage 8" | ||
* 1 paint brush - 2.5" | * 1 paint brush - 2.5" | ||
* 2 roller trays (1 medium, 1 large) | * 2 roller trays (1 medium, 1 large) | ||
==Supplies== | ==Supplies== | ||
Revision as of 02:05, 13 November 2009
The following is a list of tools and supplies that are on site at the Brew Hut
There's not a lot of work left to do up there. We do not need many tools up there any more.
- Items marked XX should be brought down.
Last updated September 9, 2008
Tools
- spade shovel
- medium size, small tooth dull Hand Saw
- hacksaw (adjustable, currently 12") with two blades
- bow saw with 2 spare 21" blades
- hatchet
- pliers
- adjustable bit screw driver - needs various size robertson bits
- carpenter's Hammer -- 1
- tape measure -- 1
- wire brush
- small caulking gun - no caulk
- paint roller cage 8"
- 1 paint brush - 2.5"
- 2 roller trays (1 medium, 1 large)
Supplies
- collection of nails & screws
- weather stripping
- Cable ties
- Copper wire, grounding plate and grounding clamps (to ground the hut for lightning protection)
- 1L paint thinner < 1/2 full
- industrial door sweep
- 2L light grey industrial paint (windows and window frames) (might be bad)
- 3/4L of yellow paint (for window and door trim boards)
- part of a 1L can of oil based primer