Brew Hut rebuild/Tools list: Difference between revisions
Jump to navigation
Jump to search
imported>Artem No edit summary |
imported>Rwburton mNo edit summary |
||
| Line 2: | Line 2: | ||
There's not a lot of work left to do up there. We do not need many tools up there any more. | There's not a lot of work left to do up there. We do not need many tools up there any more. | ||
Last updated November 14th, 2009 | Last updated November 14th, 2009 | ||
Revision as of 17:02, 24 November 2009
The following is a list of tools and supplies that are on site at the Brew Hut
There's not a lot of work left to do up there. We do not need many tools up there any more.
Last updated November 14th, 2009
Tools
- spade shovel
- medium size, small tooth dull Hand Saw
- hacksaw (adjustable, currently 12") with two blades
- bow saw with 2 spare 21" blades
- hatchet
- pliers
- adjustable bit screw driver - needs various size robertson bits
- carpenter's Hammer -- 1
- tape measure -- 1
- wire brush
- small caulking gun - no caulk
- paint roller cage 8"
- 1 paint brush - 2.5"
- 2 roller trays (1 medium, 1 large)
Supplies
- collection of nails & screws
- weather stripping
- Cable ties
- Copper wire, grounding plate and grounding clamps (to ground the hut for lightning protection)
- 1L paint thinner < 1/2 full
- industrial door sweep
- 2L light grey industrial paint (windows and window frames) (might be bad)
- 3/4L of yellow paint (for window and door trim boards)
- part of a 1L can of oil based primer