Brew Hut rebuild/Tools list

The following is a list of tools and supplies that are on site at the Brew Hut

There's not a lot of work left to do up there. We do not need many tools up there any more.

• Items marked XX should be brought down, or flown out with the trash.
• Items marked RR, Roland wants them back.

Last updated September 9, 2007

Tools

• spade shovel
• medium size, small tooth dull Hand Saw
• hacksaw (adjustable, currently 12") with two blades
• bow saw with 2 spare 21" blades
• new hatchet
• Carpenter's Hammer -- 1
• Heavy Hammer (mini sledge) for rock drill XX
• Rock mashing hammer
• tape measure -- 1
• Wire brush (scrub rocks?)
• small caulking gun
• Crowbar
• flat pry bar XX
• pick axe (XX once grounding plate installed?)
• rasp (wood file) RR
• paint roller cage 8"
• 1 paint brush - 1"
• 2 roller trays (1 medium, 1 large)
• magnetic 3/8" nut driver for sheet metal screws
• nail puller
• pliers

Supplies

• collection of nails & screws
• 1 (white) and 1/3rd (clear) tubes of dynaflex 230 caulking.
• weather stripping
• Cable ties
• vent cap (no vent to put it on)
• Copper wire, grounding plate and grounding clamps (to ground the hut for lightning protection)
• 1L paint thinner mostly full
• industrial door sweep
• 3L light grey industrial paint (windows and window frames)
• 2L dark grey industrial paint (floor)
• 1.5L light pink (almost white) industrial paint (outhouse interior)
• 3/4L of yellow paint (for window and door trim boards)
• part of a 1L can of oil based primer