Hut Inventory: Difference between revisions
Jump to navigation
Jump to search
imported>George No edit summary |
imported>George No edit summary |
||
| Line 66: | Line 66: | ||
==Burton Hut== | ==Burton Hut== | ||
{{main|Burton Hut}} | {{main|Burton Hut}} | ||
==Lizzie Creek Hut== | |||
{{main|Lizzie Creek Hut}} | |||
Revision as of 07:14, 5 October 2016
This page details the specific Inventory at each of the VOC Huts. Tools at the clubroom available for Workhikes can be viewed on the Tool Inventory Page.
The Hut Maintenance Page can be viewed here: Hut Maintenance
Phelix Hut
Harrison Hut
Unknown when last updated.
Tools
All tools on the trail are just before the trail begins its descent into Pika creek, under a tarp. (Needs confirmation if this is still there)
- 1 x lopper
Supplies
- Rebar - ~10
- aluminum nails - handful
- reflective markers - handful
On the Trail
- Chain - one length cached under the rock next to where it is to be installed, hardware given to Julien to take to clubroom, rest installed
- Rebar - ~9? at trail head behind the big tree trunk where the sign is hung. ~20 at flat bench just before Pika creek. ~10 at 5 min past Pika creek. ~5 at Barr creek
- Steel Spikes - ~40 before Pika creek. (with rebar)
Brew Hut
The following is a list of tools and supplies that are on site at the Brew Hut There's not a lot of work left to do up there. We do not need many tools up there any more.
Last updated November 14th, 2009
Tools
- spade shovel
- medium size, small tooth dull Hand Saw
- hacksaw (adjustable, currently 12") with two blades
- bow saw with 2 spare 21" blades
- hatchet
- pliers
- adjustable bit screw driver - needs various size robertson bits
- carpenter's Hammer -- 1
- tape measure -- 1
- wire brush
- small caulking gun - no caulk
- paint roller cage 8"
- 1 paint brush - 2.5"
- 2 roller trays (1 medium, 1 large)
Supplies
- collection of nails & screws
- weather stripping
- Cable ties
- Copper wire, grounding plate and grounding clamps (to ground the hut for lightning protection)
- 1L paint thinner < 1/2 full
- industrial door sweep
- 2L light grey industrial paint (windows and window frames) (might be bad)
- 3/4L of yellow paint (for window and door trim boards)
- part of a 1L can of oil based primer
Burton Hut