Workhike:Harrison 2016-09-03: Difference between revisions
Jump to navigation
Jump to search
imported>George Created page with " == Summary Notes == Run by: George Completed Hut Measurements including loft, main floor and door. Rip-rap and wire mesh around hut working. Place new floor o..." |
imported>George No edit summary |
||
| Line 1: | Line 1: | ||
====Summary Notes==== | |||
== Summary Notes == | *Run by: [[User:George|George]] | ||
Run by: [[User:George|George]] | *Completed Hut Measurements including loft, main floor and door. | ||
Completed Hut Measurements including loft, main floor and door. | *Rip-rap and wire mesh around hut working. Place new floor over old floor. May have to take out edge trimmings | ||
Rip-rap and wire mesh around hut working. Place new floor over old floor. May have to take out edge trimmings | *Multiple logs across the 2nd part of the trail and low wood stock at the Hut warrants the need for a chainsaw | ||
Multiple logs across the 2nd part of the trail and low wood stock at the Hut warrants the need for a chainsaw | *Still need to haul out old Coleman stove. Coleman Lamps working well and should be left at the Hut until an alternative can be put in place (solar). | ||
Still need to haul out old Coleman stove. Coleman Lamps working well and should be left at the Hut until an alternative can be put in place (solar). | *Plywood floor must be flat edged for a perfect fit. 2' x 4' x 4' x 2' wide | ||
Plywood floor must be flat edged for a perfect fit. 2' x 4' x 4' x 2' wide | ====Raw Notes==== | ||
*need to do Floor Measurements | |||
== Raw Notes == | *Upstairs Railing (measurements) may have necessary material at the Hut. Need to do inventory. | ||
need to do Floor Measurements | *New stove hauled up. Need to haul old stove down. Leave gas for lanterns. | ||
Upstairs Railing (measurements) may have necessary material at the Hut. Need to do inventory. | *Running low on wood for the hut. Could use chainsaws on trail portion from end of logging road to barr creek bridge. | ||
New stove hauled up. Need to haul old stove down. Leave gas for lanterns. | *Use chainsaws up at hut to cut more wood. -> is this necessary? Could an axe do the work? Do we have an axe at the hut? | ||
Running low on wood for the hut. Could use chainsaws on trail portion from end of logging road to barr creek bridge. | *Nice guitar and case up to the hut with the helicopter? Need case to protect from moisture. | ||
Use chainsaws up at hut to cut more wood. -> is this necessary? Could an axe do the work? Do we have an axe at the hut? | *Plywood in old outhouse. | ||
Nice guitar and case up to the hut with the helicopter? Need case to protect from moisture. | *Have two bow-saws at hut. | ||
Plywood in old outhouse. | *There will be standard door frames. Non-standard door frames will be expensive. Want 1/2" to 1/4" door frame for steel door. | ||
Have two bow-saws at hut. | *Want door to extend right to wall. Need to put aluminum to fit to door. | ||
There will be standard door frames. Non-standard door frames will be expensive. Want 1/2" to 1/4" door frame for steel door. | *2x3 wood | ||
Want door to extend right to wall. Need to put aluminum to fit to door. | *aluminim paneling on outside of hut | ||
2x3 wood | *Chicken wire and rip-rap around seems to be working against the marmots. | ||
aluminim paneling on outside of hut | *Would be nice to have signage along logging road for directions to hut and to the springs | ||
Chicken wire and rip-rap around seems to be working against the marmots. | *signage for the springs is more important because of the turn off on the logging road. | ||
Would be nice to have signage along logging road for directions to hut and to the springs | *some sections of the trail could use brushing. Mostly the first 6km. 2nd part is in good condition with exception of the fallen logs. | ||
signage for the springs is more important because of the turn off on the logging road. | *would be nice to have poker chips & a nice set of cards @ the hut. Maybe a rumoli matt | ||
some sections of the trail could use brushing. Mostly the first 6km. 2nd part is in good condition with exception of the fallen logs. | *bridge right next to hut seems unnecessary for all seasons (may not spring? idk, need to see pictures) | ||
would be nice to have poker chips & a nice set of cards @ the hut. Maybe a rumoli matt | *hay wire and duct tape for all huts | ||
bridge right next to hut seems unnecessary for all seasons (may not spring? idk, need to see pictures) | *for harrison put floor ontop of old floor. 2' x 4' x 4' x 2' to overlap cracks | ||
hay wire and duct tape for all huts | *will want to rip in vancouver | ||
for harrison put floor ontop of old floor. 2' x 4' x 4' x 2' to overlap cracks | *make sure door is hollow. & talk to someone about fit. | ||
will want to rip in vancouver | |||
make sure door is hollow. & talk to someone about fit. | |||
Latest revision as of 07:21, 3 January 2019
Summary Notes
- Run by: George
- Completed Hut Measurements including loft, main floor and door.
- Rip-rap and wire mesh around hut working. Place new floor over old floor. May have to take out edge trimmings
- Multiple logs across the 2nd part of the trail and low wood stock at the Hut warrants the need for a chainsaw
- Still need to haul out old Coleman stove. Coleman Lamps working well and should be left at the Hut until an alternative can be put in place (solar).
- Plywood floor must be flat edged for a perfect fit. 2' x 4' x 4' x 2' wide
Raw Notes
- need to do Floor Measurements
- Upstairs Railing (measurements) may have necessary material at the Hut. Need to do inventory.
- New stove hauled up. Need to haul old stove down. Leave gas for lanterns.
- Running low on wood for the hut. Could use chainsaws on trail portion from end of logging road to barr creek bridge.
- Use chainsaws up at hut to cut more wood. -> is this necessary? Could an axe do the work? Do we have an axe at the hut?
- Nice guitar and case up to the hut with the helicopter? Need case to protect from moisture.
- Plywood in old outhouse.
- Have two bow-saws at hut.
- There will be standard door frames. Non-standard door frames will be expensive. Want 1/2" to 1/4" door frame for steel door.
- Want door to extend right to wall. Need to put aluminum to fit to door.
- 2x3 wood
- aluminim paneling on outside of hut
- Chicken wire and rip-rap around seems to be working against the marmots.
- Would be nice to have signage along logging road for directions to hut and to the springs
- signage for the springs is more important because of the turn off on the logging road.
- some sections of the trail could use brushing. Mostly the first 6km. 2nd part is in good condition with exception of the fallen logs.
- would be nice to have poker chips & a nice set of cards @ the hut. Maybe a rumoli matt
- bridge right next to hut seems unnecessary for all seasons (may not spring? idk, need to see pictures)
- hay wire and duct tape for all huts
- for harrison put floor ontop of old floor. 2' x 4' x 4' x 2' to overlap cracks
- will want to rip in vancouver
- make sure door is hollow. & talk to someone about fit.