Archive:2009 BWH renos 1

Synopsis

We have already had round -1, where Meghan and Roland (mostly Meghan) hauled in various supplies and materials for the renovation.

Round zero will happen the week of June 1st, when four people will go up, haul in various supplies, do work, hang out, etc.

June 13-14.

Optional pre-trip meeting Wednesday June 10th, at the intersection of Tolmie and the ocean (ie. Spanish Banks, frisbee) at 7pm.

Clear boulders from the road so it's passable by high clearance 4x4s. If we drove up Friday evening and camped, we could spend early Saturday morning trundling boulders off the road. The slide is already barely passable; another hour of work should make it good.
Vanquish the mildew. This involves Behr #62 mildew killer and Behr #63 wood preparation concentrate, a scrubbing brush with a long handle, plus maybe rubber gloves. I think we apply #62 sparingly, then wash it off with clear water from the stream, then apply #63. Anybody have experience with this? We have already hauled up the #62, #63, two brushes, and a long handle.
Double glaze the windows. We need to haul up some screws and clips for attaching the windows. We have already hauled in the 40 lbs of Lexan.
Fix the roof. The roof already got mostly fixed during a fast-job in the fall. We've just got to touch it up all the way. Will involve lots of expanding foam, asphalt caulking, and some Al sheet.
(possibly) install Roland's Solar Device (TM). Device is 2' x 8' and weighs 25 lbs. If we don't have enough spare people to install the solar air heater component, we can at least install the fan component, so that it will be sucking air through the Hut and drying it in preparation for Round 2: painting. Roland is the Solar Device Committee.

bleach, (1kg) Sponges and rags for applying bleach. Light plastic pail for diluting bleach or Behr (can we not use something that is in there: pot, nail bucket, 5 gallon pail).
little metal clips, screws for the windows
Optional solar air heater, 2' x 8', 25 lbs and unpleasant to carry. Some wire.
roof fixing stuff, screws, big roll of aluminium.
paint for table

window clips/fasteners/drill bit
screens
screws/clips to install screens
more scrubbing power; another long handled brush
25' Al sheet
caulking for roof
expanding foam for roof
caulking for Lexan
screws for roof
appropriate bit for roof screws (3/8" hex for large diameter screws, 1/4" hex for small diameter)
punch for screw holes in sheet (Roof screws can be used as a punch)(no need to punch. just use power drill)
4x paint brushes

caulking gun x2 (I will supply one small and one large caulking gun in my car -- rb)
screwdriver (there's three up there with assorted bits, -- rb)
hammer x2 (hut has 1)(I will have a clawhammer with a broken claw, in my car -- rb)
cutters for Al sheet (they are in my car -- rb)
vise grips to modify solar panel, etc ( vise grips are in my car -- rb)
saw (drywall saw and remains of Japanese "pull" saw are up there, keyhole saw in my car -- rb)
brace 'n bit x2 (bring power drill)
little prybar x2

Roof gear

Try and pick cars close to where you live, if possible

Veenstramobile (coming from the airport this time)